"Circuit Selects Single Or Multiple Lines," EDN September 17, 1987

A resource for technical documentation. Datasheets, application notes, instruction manuals, books and links to resources are found in the Document Library.
Post Reply
User avatar
mediatechnology
Posts: 5594
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

"Circuit Selects Single Or Multiple Lines," EDN September 17, 1987

Post by mediatechnology »

"Circuit Selects Single Or Multiple Lines," Bob Mostafapour, EDN September 17, 1987

A simple circuit to emulate an interlocking selector with momentary pushbutton switches. The left-hand side of the circuit, which is optional, allows simultaneous selection of multiple outputs. If IC1 is not used the 1 uF caps are not needed and the pull-down resistors should be grounded.

https://proaudiodesignforum.com/images/ ... 7_1987.pdf

Image
Post Reply